Move#

Access Move from the Model Tune window (Model Tools > Model Tune > Move).

Use Move to manually change the model's location in the site by dragging the gizmo or by specifying the distance along an axis.

The Move tab also includes:

• Lock Position to save the model's current position, rotation, and scale.
• Reset to revert unsaved changes made in the tab.

Move the model#

1. In the Model Tune menu, select the Move tab.

2. Change the model's location in the site:

   • To manually move the model to a new location on the site:

     1. Enable Drag Gizmo.
     2. Airtap and pinch an axis or plane, then drag in the direction defined by the axis. You can increase or decrease drag speed.
        Note: You may have to move around the gizmo to select the axis that allows forward and backward movement.

     While the Move tab is open, the gizmo follows you, staying within your view.

   • Use incremental move to enter a numerical value and fine-tune the position:

     • To change the magnitude of the increment, under Increment, airtap the + (plus) or - (minus) button.
     • To apply the increment to an axis, airtap the + (plus) or – (minus) button for that axis. The model moves along the axis as you apply each increment.

Reset#

Tap Reset to return the model to its position before Model Tools was opened.

This reset is independent of Rotation, Scale, or Floors.

Lock Position#

You can lock the model's current position, which includes changes to rotation, and scale, from the Move, Rotate or Scale tabs, or you can continue making changes with Model Tools and lock from the Model Tools window. For more information, see Lock the model's position.

To lock the model's current position, rotation, and scale:

1. Tap Lock Position.

1. Move the anchor to a location on the scan mesh near the location of your model adjustment.

   Important:

   • To use the anchor later in your project, you must be able to physically locate yourself within 10 feet of the anchor.
   • An anchor must be at least 10 feet from any other anchor or any AR marker.

2. Airtap the anchor to place it.

3. Airtap Yes to confirm the placement.

   The anchor saves, and if you're online, uploads to the cloud.

4. In online mode, a white cloud appears beside the lock after it uploads. In offline mode, an orange cloud with a strike through it appears beside a saved anchor.