Attention: VisualLive is not available for purchase on visuallive.com after May 1, 2023, and can only be purchased through a Unity client partner until June 30, 2023. Maintenance support as outlined in the terms of service ends either May 1, 2024 or one year after purchase; with no new features added and only minor bug fixes supported.
Scale
Use Scale to change the size of the model.
You can scale equally on all axes or scale along each axis independently.
Note: You cannot scale using finger movements. Drag, that is, moving and rotating with finger movements, is available while scale is enabled.
Scale the model
- In the Align menu, tap Scale.
Select how you want to scale:
- Tap X, Y, or Z to select an axis to scale.
- To scale equally along all axes, ensure the link icon is enabled .
Move the vertical slider control to change the scale.
Reset
Tap Reset to revert the model to its size before the Scale tool was used.
This reset is independent of position or rotation. For example, If you moved the model and reduced the scale to 50 percent since the last saved alignment, when you tap Reset in Scale, the model remains in the position it was moved to, but reverts to its earlier size.
If you save the alignment, Reset does not revert the model to its earlier size.
Incremental scale
- In the Align menu, tap the Scale button.
In the Scale dialog box, tap the
gear icon.To change the order of magnitude of the increment used, under Increment, tap the + (plus) or - (minus).
To scale in increments:
- along one axis, ensure that the axes are not linked and tap the + (plus) or - (minus) button for the axis.
- equally along all axes, ensure that the axes are linked and tap the + (plus) or - (minus) button for any axis.