Attention: VisualLive is not available for purchase on visuallive.com after May 1, 2023, and can only be purchased through a Unity client partner until June 30, 2023. Maintenance support as outlined in the terms of service ends either May 1, 2024 or one year after purchase; with no new features added and only minor bug fixes supported.
AR mode
Use AR mode to visualize your model in the environment:
- You can use this mode to view your model at full-size in its real-world job site. To do this, the model must be aligned with the site in AR mode.
- You can also use AR mode to view a scaled model on a table top or to visualize a model off site, for example, in your office.
Note: To choose the best alignment method, consider the characteristics of the site, your reasons for visualizing the model, and your device. Making an initial visit to plan for alignment is recommended. For information, see Preparing for Augmented Reality (AR).
The following topics cover the process of loading, placing, and aligning models on a site.
| Topic | Description |
|---|---|
| AR mode interface overview | Find your way around the AR mode screen. |
| Open AR mode | Switch to AR mode from Navigate mode. |
| Scan the site | Learn when to scan, how to minimize scan problems, and how to show scan coverage. |
| Move into position | Guidelines for how close you must be to an AR marker, alignment points, or an anchor lock to accurately place a model. |
| Load and place the model | Methods to load and place the model. The method you use depends on whether you're using AR markers, reference points, or anchor locks, or whether you're manually moving the model into alignment. |
| Model alignment tools | Manually move the model using tools in the Align menu. Use anchor locks to save the model's alignment with the site. |
| Fixing alignment | Correct the initial alignment or redo alignment if necessary. Align the model where it has drifted out of alignment with the site. |