DrawProceduralIndirect
Add a "draw procedural geometry" command.
Read time 15 minutesLast updated 5 days ago
Definition
- Type: Method
- Namespace: UnityEngine.Rendering
- Assembly: UnityEngine.CoreModule
DrawProceduralIndirect(Matrix4x4, Material, int, MeshTopology, ComputeBuffer, int, MaterialPropertyBlock)
Add a "draw procedural geometry" command.
public void DrawProceduralIndirect(Matrix4x4 matrix, Material material, int shaderPass, MeshTopology topology, ComputeBuffer bufferWithArgs, int argsOffset, MaterialPropertyBlock properties)
Parameters
Transformation matrix to use.
Material to use.
Which pass of the shader to use (or -1 for all passes).
Topology of the procedural geometry.
Buffer with draw arguments.
Byte offset where in the buffer the draw arguments are.
Additional material properties to apply just before rendering. See MaterialPropertyBlock.
Remarks
When the command buffer executes, this will do a draw call on the GPU, without any vertex or index buffers. The amount of geometry to draw is read from a ComputeBuffer. Typical use case is generating an arbitrary amount of data from a ComputeShader and then rendering that, without requiring a readback to the CPU.
This is only useful on Shader Model 4.5 level hardware where shaders can read arbitrary data from ComputeBuffer buffers.
Buffer with arguments, , has to have four integer numbers at given offset: vertex count per instance, instance count, start vertex location, and start instance location. This maps to Direct3D11 DrawInstancedIndirect and equivalent functions on other graphics APIs. On OpenGL versions before 4.2 and all OpenGL ES versions that support indirect draw, the last argument is reserved and therefore must be zero.
bufferWithArgsargsOffsetIn the vertex shader, you'd typically use SV_VertexID and SV_InstanceID input variables to fetch data from some buffers.
Additional Resources: CommandBuffer.DrawProcedural, MaterialPropertyBlock, Graphics.DrawProceduralIndirect, ComputeBuffer.CopyCount, SystemInfo.supportsComputeShaders.
DrawProceduralIndirect(Matrix4x4, Material, int, MeshTopology, ComputeBuffer, int)
Add a "draw procedural geometry" command.
public void DrawProceduralIndirect(Matrix4x4 matrix, Material material, int shaderPass, MeshTopology topology, ComputeBuffer bufferWithArgs, int argsOffset)
Parameters
Transformation matrix to use.
Material to use.
Which pass of the shader to use (or -1 for all passes).
Topology of the procedural geometry.
Buffer with draw arguments.
Byte offset where in the buffer the draw arguments are.
Remarks
When the command buffer executes, this will do a draw call on the GPU, without any vertex or index buffers. The amount of geometry to draw is read from a ComputeBuffer. Typical use case is generating an arbitrary amount of data from a ComputeShader and then rendering that, without requiring a readback to the CPU.
This is only useful on Shader Model 4.5 level hardware where shaders can read arbitrary data from ComputeBuffer buffers.
Buffer with arguments, , has to have four integer numbers at given offset: vertex count per instance, instance count, start vertex location, and start instance location. This maps to Direct3D11 DrawInstancedIndirect and equivalent functions on other graphics APIs. On OpenGL versions before 4.2 and all OpenGL ES versions that support indirect draw, the last argument is reserved and therefore must be zero.
bufferWithArgsargsOffsetIn the vertex shader, you'd typically use SV_VertexID and SV_InstanceID input variables to fetch data from some buffers.
Additional Resources: CommandBuffer.DrawProcedural, MaterialPropertyBlock, Graphics.DrawProceduralIndirect, ComputeBuffer.CopyCount, SystemInfo.supportsComputeShaders.
DrawProceduralIndirect(Matrix4x4, Material, int, MeshTopology, ComputeBuffer)
Add a "draw procedural geometry" command.
public void DrawProceduralIndirect(Matrix4x4 matrix, Material material, int shaderPass, MeshTopology topology, ComputeBuffer bufferWithArgs)
Parameters
Transformation matrix to use.
Material to use.
Which pass of the shader to use (or -1 for all passes).
Topology of the procedural geometry.
Buffer with draw arguments.
Remarks
When the command buffer executes, this will do a draw call on the GPU, without any vertex or index buffers. The amount of geometry to draw is read from a ComputeBuffer. Typical use case is generating an arbitrary amount of data from a ComputeShader and then rendering that, without requiring a readback to the CPU.
This is only useful on Shader Model 4.5 level hardware where shaders can read arbitrary data from ComputeBuffer buffers.
Buffer with arguments, , has to have four integer numbers at given offset: vertex count per instance, instance count, start vertex location, and start instance location. This maps to Direct3D11 DrawInstancedIndirect and equivalent functions on other graphics APIs. On OpenGL versions before 4.2 and all OpenGL ES versions that support indirect draw, the last argument is reserved and therefore must be zero.
bufferWithArgsargsOffsetIn the vertex shader, you'd typically use SV_VertexID and SV_InstanceID input variables to fetch data from some buffers.
Additional Resources: CommandBuffer.DrawProcedural, MaterialPropertyBlock, Graphics.DrawProceduralIndirect, ComputeBuffer.CopyCount, SystemInfo.supportsComputeShaders.
DrawProceduralIndirect(GraphicsBuffer, Matrix4x4, Material, int, MeshTopology, ComputeBuffer, int, MaterialPropertyBlock)
Add a "draw procedural geometry" command.
public void DrawProceduralIndirect(GraphicsBuffer indexBuffer, Matrix4x4 matrix, Material material, int shaderPass, MeshTopology topology, ComputeBuffer bufferWithArgs, int argsOffset, MaterialPropertyBlock properties)
Parameters
Index buffer used to submit vertices to the GPU.
Transformation matrix to use.
Material to use.
Which pass of the shader to use (or -1 for all passes).
Topology of the procedural geometry.
Buffer with draw arguments.
Byte offset where in the buffer the draw arguments are.
Additional material properties to apply just before rendering. See MaterialPropertyBlock.
Remarks
When the command buffer executes, this will do a draw call on the GPU, without a vertex buffer. The amount of geometry to draw is read from a ComputeBuffer. Typical use case is generating an arbitrary amount of data from a ComputeShader and then rendering that, without requiring a readback to the CPU.
This is only useful on Shader Model 4.5 level hardware where shaders can read arbitrary data from ComputeBuffer buffers.
Buffer with arguments, , has to have five integer numbers at given offset: index count per instance, instance count, start index location, base vertex location, and start instance location. This maps to Direct3D11 DrawIndexedInstancedIndirect and equivalent functions on other graphics APIs. On OpenGL versions before 4.2 and all OpenGL ES versions that support indirect draw, the last argument is reserved and therefore must be zero.
bufferWithArgsargsOffsetIn the vertex shader, you'd typically use SV_VertexID and SV_InstanceID input variables to fetch data from some buffers.
Additional Resources: CommandBuffer.DrawProcedural, MaterialPropertyBlock, Graphics.DrawProceduralIndirect, ComputeBuffer.CopyCount, SystemInfo.supportsComputeShaders.
DrawProceduralIndirect(GraphicsBuffer, Matrix4x4, Material, int, MeshTopology, ComputeBuffer, int)
Add a "draw procedural geometry" command.
public void DrawProceduralIndirect(GraphicsBuffer indexBuffer, Matrix4x4 matrix, Material material, int shaderPass, MeshTopology topology, ComputeBuffer bufferWithArgs, int argsOffset)
Parameters
Index buffer used to submit vertices to the GPU.
Transformation matrix to use.
Material to use.
Which pass of the shader to use (or -1 for all passes).
Topology of the procedural geometry.
Buffer with draw arguments.
Byte offset where in the buffer the draw arguments are.
Remarks
When the command buffer executes, this will do a draw call on the GPU, without a vertex buffer. The amount of geometry to draw is read from a ComputeBuffer. Typical use case is generating an arbitrary amount of data from a ComputeShader and then rendering that, without requiring a readback to the CPU.
This is only useful on Shader Model 4.5 level hardware where shaders can read arbitrary data from ComputeBuffer buffers.
Buffer with arguments, , has to have five integer numbers at given offset: index count per instance, instance count, start index location, base vertex location, and start instance location. This maps to Direct3D11 DrawIndexedInstancedIndirect and equivalent functions on other graphics APIs. On OpenGL versions before 4.2 and all OpenGL ES versions that support indirect draw, the last argument is reserved and therefore must be zero.
bufferWithArgsargsOffsetIn the vertex shader, you'd typically use SV_VertexID and SV_InstanceID input variables to fetch data from some buffers.
Additional Resources: CommandBuffer.DrawProcedural, MaterialPropertyBlock, Graphics.DrawProceduralIndirect, ComputeBuffer.CopyCount, SystemInfo.supportsComputeShaders.
DrawProceduralIndirect(GraphicsBuffer, Matrix4x4, Material, int, MeshTopology, ComputeBuffer)
Add a "draw procedural geometry" command.
public void DrawProceduralIndirect(GraphicsBuffer indexBuffer, Matrix4x4 matrix, Material material, int shaderPass, MeshTopology topology, ComputeBuffer bufferWithArgs)
Parameters
Index buffer used to submit vertices to the GPU.
Transformation matrix to use.
Material to use.
Which pass of the shader to use (or -1 for all passes).
Topology of the procedural geometry.
Buffer with draw arguments.
Remarks
When the command buffer executes, this will do a draw call on the GPU, without a vertex buffer. The amount of geometry to draw is read from a ComputeBuffer. Typical use case is generating an arbitrary amount of data from a ComputeShader and then rendering that, without requiring a readback to the CPU.
This is only useful on Shader Model 4.5 level hardware where shaders can read arbitrary data from ComputeBuffer buffers.
Buffer with arguments, , has to have five integer numbers at given offset: index count per instance, instance count, start index location, base vertex location, and start instance location. This maps to Direct3D11 DrawIndexedInstancedIndirect and equivalent functions on other graphics APIs. On OpenGL versions before 4.2 and all OpenGL ES versions that support indirect draw, the last argument is reserved and therefore must be zero.
bufferWithArgsargsOffsetIn the vertex shader, you'd typically use SV_VertexID and SV_InstanceID input variables to fetch data from some buffers.
Additional Resources: CommandBuffer.DrawProcedural, MaterialPropertyBlock, Graphics.DrawProceduralIndirect, ComputeBuffer.CopyCount, SystemInfo.supportsComputeShaders.
DrawProceduralIndirect(Matrix4x4, Material, int, MeshTopology, GraphicsBuffer, int, MaterialPropertyBlock)
Add a "draw procedural geometry" command.
public void DrawProceduralIndirect(Matrix4x4 matrix, Material material, int shaderPass, MeshTopology topology, GraphicsBuffer bufferWithArgs, int argsOffset, MaterialPropertyBlock properties)
Parameters
Transformation matrix to use.
Material to use.
Which pass of the shader to use (or -1 for all passes).
Topology of the procedural geometry.
Buffer with draw arguments.
Byte offset where in the buffer the draw arguments are.
Additional material properties to apply just before rendering. See MaterialPropertyBlock.
Remarks
When the command buffer executes, this will do a draw call on the GPU, without any vertex or index buffers. The amount of geometry to draw is read from a ComputeBuffer. Typical use case is generating an arbitrary amount of data from a ComputeShader and then rendering that, without requiring a readback to the CPU.
This is only useful on Shader Model 4.5 level hardware where shaders can read arbitrary data from ComputeBuffer buffers.
Buffer with arguments, , has to have four integer numbers at given offset: vertex count per instance, instance count, start vertex location, and start instance location. This maps to Direct3D11 DrawInstancedIndirect and equivalent functions on other graphics APIs. On OpenGL versions before 4.2 and all OpenGL ES versions that support indirect draw, the last argument is reserved and therefore must be zero.
bufferWithArgsargsOffsetIn the vertex shader, you'd typically use SV_VertexID and SV_InstanceID input variables to fetch data from some buffers.
Additional Resources: CommandBuffer.DrawProcedural, MaterialPropertyBlock, Graphics.DrawProceduralIndirect, ComputeBuffer.CopyCount, SystemInfo.supportsComputeShaders.
DrawProceduralIndirect(Matrix4x4, Material, int, MeshTopology, GraphicsBuffer, int)
Add a "draw procedural geometry" command.
public void DrawProceduralIndirect(Matrix4x4 matrix, Material material, int shaderPass, MeshTopology topology, GraphicsBuffer bufferWithArgs, int argsOffset)
Parameters
Transformation matrix to use.
Material to use.
Which pass of the shader to use (or -1 for all passes).
Topology of the procedural geometry.
Buffer with draw arguments.
Byte offset where in the buffer the draw arguments are.
Remarks
When the command buffer executes, this will do a draw call on the GPU, without any vertex or index buffers. The amount of geometry to draw is read from a ComputeBuffer. Typical use case is generating an arbitrary amount of data from a ComputeShader and then rendering that, without requiring a readback to the CPU.
This is only useful on Shader Model 4.5 level hardware where shaders can read arbitrary data from ComputeBuffer buffers.
Buffer with arguments, , has to have four integer numbers at given offset: vertex count per instance, instance count, start vertex location, and start instance location. This maps to Direct3D11 DrawInstancedIndirect and equivalent functions on other graphics APIs. On OpenGL versions before 4.2 and all OpenGL ES versions that support indirect draw, the last argument is reserved and therefore must be zero.
bufferWithArgsargsOffsetIn the vertex shader, you'd typically use SV_VertexID and SV_InstanceID input variables to fetch data from some buffers.
Additional Resources: CommandBuffer.DrawProcedural, MaterialPropertyBlock, Graphics.DrawProceduralIndirect, ComputeBuffer.CopyCount, SystemInfo.supportsComputeShaders.
DrawProceduralIndirect(Matrix4x4, Material, int, MeshTopology, GraphicsBuffer)
Add a "draw procedural geometry" command.
public void DrawProceduralIndirect(Matrix4x4 matrix, Material material, int shaderPass, MeshTopology topology, GraphicsBuffer bufferWithArgs)
Parameters
Transformation matrix to use.
Material to use.
Which pass of the shader to use (or -1 for all passes).
Topology of the procedural geometry.
Buffer with draw arguments.
Remarks
When the command buffer executes, this will do a draw call on the GPU, without any vertex or index buffers. The amount of geometry to draw is read from a ComputeBuffer. Typical use case is generating an arbitrary amount of data from a ComputeShader and then rendering that, without requiring a readback to the CPU.
This is only useful on Shader Model 4.5 level hardware where shaders can read arbitrary data from ComputeBuffer buffers.
Buffer with arguments, , has to have four integer numbers at given offset: vertex count per instance, instance count, start vertex location, and start instance location. This maps to Direct3D11 DrawInstancedIndirect and equivalent functions on other graphics APIs. On OpenGL versions before 4.2 and all OpenGL ES versions that support indirect draw, the last argument is reserved and therefore must be zero.
bufferWithArgsargsOffsetIn the vertex shader, you'd typically use SV_VertexID and SV_InstanceID input variables to fetch data from some buffers.
Additional Resources: CommandBuffer.DrawProcedural, MaterialPropertyBlock, Graphics.DrawProceduralIndirect, ComputeBuffer.CopyCount, SystemInfo.supportsComputeShaders.
DrawProceduralIndirect(GraphicsBuffer, Matrix4x4, Material, int, MeshTopology, GraphicsBuffer, int, MaterialPropertyBlock)
Add a "draw procedural geometry" command.
public void DrawProceduralIndirect(GraphicsBuffer indexBuffer, Matrix4x4 matrix, Material material, int shaderPass, MeshTopology topology, GraphicsBuffer bufferWithArgs, int argsOffset, MaterialPropertyBlock properties)
Parameters
Index buffer used to submit vertices to the GPU.
Transformation matrix to use.
Material to use.
Which pass of the shader to use (or -1 for all passes).
Topology of the procedural geometry.
Buffer with draw arguments.
Byte offset where in the buffer the draw arguments are.
Additional material properties to apply just before rendering. See MaterialPropertyBlock.
Remarks
When the command buffer executes, this will do a draw call on the GPU, without a vertex buffer. The amount of geometry to draw is read from a ComputeBuffer. Typical use case is generating an arbitrary amount of data from a ComputeShader and then rendering that, without requiring a readback to the CPU.
This is only useful on Shader Model 4.5 level hardware where shaders can read arbitrary data from ComputeBuffer buffers.
Buffer with arguments, , has to have five integer numbers at given offset: index count per instance, instance count, start index location, base vertex location, and start instance location. This maps to Direct3D11 DrawIndexedInstancedIndirect and equivalent functions on other graphics APIs. On OpenGL versions before 4.2 and all OpenGL ES versions that support indirect draw, the last argument is reserved and therefore must be zero.
bufferWithArgsargsOffsetIn the vertex shader, you'd typically use SV_VertexID and SV_InstanceID input variables to fetch data from some buffers.
Additional Resources: CommandBuffer.DrawProcedural, MaterialPropertyBlock, Graphics.DrawProceduralIndirect, ComputeBuffer.CopyCount, SystemInfo.supportsComputeShaders.
DrawProceduralIndirect(GraphicsBuffer, Matrix4x4, Material, int, MeshTopology, GraphicsBuffer, int)
Add a "draw procedural geometry" command.
public void DrawProceduralIndirect(GraphicsBuffer indexBuffer, Matrix4x4 matrix, Material material, int shaderPass, MeshTopology topology, GraphicsBuffer bufferWithArgs, int argsOffset)
Parameters
Index buffer used to submit vertices to the GPU.
Transformation matrix to use.
Material to use.
Which pass of the shader to use (or -1 for all passes).
Topology of the procedural geometry.
Buffer with draw arguments.
Byte offset where in the buffer the draw arguments are.
Remarks
When the command buffer executes, this will do a draw call on the GPU, without a vertex buffer. The amount of geometry to draw is read from a ComputeBuffer. Typical use case is generating an arbitrary amount of data from a ComputeShader and then rendering that, without requiring a readback to the CPU.
This is only useful on Shader Model 4.5 level hardware where shaders can read arbitrary data from ComputeBuffer buffers.
Buffer with arguments, , has to have five integer numbers at given offset: index count per instance, instance count, start index location, base vertex location, and start instance location. This maps to Direct3D11 DrawIndexedInstancedIndirect and equivalent functions on other graphics APIs. On OpenGL versions before 4.2 and all OpenGL ES versions that support indirect draw, the last argument is reserved and therefore must be zero.
bufferWithArgsargsOffsetIn the vertex shader, you'd typically use SV_VertexID and SV_InstanceID input variables to fetch data from some buffers.
Additional Resources: CommandBuffer.DrawProcedural, MaterialPropertyBlock, Graphics.DrawProceduralIndirect, ComputeBuffer.CopyCount, SystemInfo.supportsComputeShaders.
DrawProceduralIndirect(GraphicsBuffer, Matrix4x4, Material, int, MeshTopology, GraphicsBuffer)
Add a "draw procedural geometry" command.
public void DrawProceduralIndirect(GraphicsBuffer indexBuffer, Matrix4x4 matrix, Material material, int shaderPass, MeshTopology topology, GraphicsBuffer bufferWithArgs)
Parameters
Index buffer used to submit vertices to the GPU.
Transformation matrix to use.
Material to use.
Which pass of the shader to use (or -1 for all passes).
Topology of the procedural geometry.
Buffer with draw arguments.
Remarks
When the command buffer executes, this will do a draw call on the GPU, without a vertex buffer. The amount of geometry to draw is read from a ComputeBuffer. Typical use case is generating an arbitrary amount of data from a ComputeShader and then rendering that, without requiring a readback to the CPU.
This is only useful on Shader Model 4.5 level hardware where shaders can read arbitrary data from ComputeBuffer buffers.
Buffer with arguments, , has to have five integer numbers at given offset: index count per instance, instance count, start index location, base vertex location, and start instance location. This maps to Direct3D11 DrawIndexedInstancedIndirect and equivalent functions on other graphics APIs. On OpenGL versions before 4.2 and all OpenGL ES versions that support indirect draw, the last argument is reserved and therefore must be zero.
bufferWithArgsargsOffsetIn the vertex shader, you'd typically use SV_VertexID and SV_InstanceID input variables to fetch data from some buffers.